Technical specifications
85 @ 3000 rpm | |
4 | |
94mm/3.7" | |
120mm/4.72" | |
3331cc /203.3 ci | |
359kg / 790 lbs | |
TM345 | |
70 amp |
Equipment
Standard Engine Specifications
70 Amp alternator with Serpentine Belt drive
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
High Rise Exhaust Elbow for 3.5″ hose
Intake silencer / Air filter
Oil change pump (fitted)
Stop solenoid
Upgrade Items
Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
High Rise Exhaust Elbow for 2" hose - 200mm rise
Panel - Type CW Waterproof
Optional Items
Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
Alternator 120 amp, Balmar, with Serpentine Belt Drive System
2nd Alternator 175 Amp (12v), engine mounted
Flexible coupling
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel – Type CW – Water Resistant Panel specs
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Extension harness with starter relay
Panel Recess with clear lid for C panel - click here for recess dimensions
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Shallow oil pan