Beta 75 ( V3600 )
Technical specifications
| 75 @ 2600 RPM | |
| 4 | |
| 98mm / 3.86" | |
| 120mm / 4.72" | |
| 3620cc / 220.9ci | |
| 414kg / 911 lbs | |
| PRM 260 | |
| 65 amp |
Equipment
Standard Engine Specifications
22" (560mm) Mount Centers
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
High Rise Exhaust Elbow for 2" hose - 150mm rise
Intake silencer / Air filter
Oil change pump (fitted)
PRM 260 Transmission
Rear facing raw water pump
Shaft Coupling
Stop solenoid
Upgrade Items
Alternator 100 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
High Rise Exhaust Elbow for 2" hose - 200mm rise
Panel - Type CW Waterproof
Optional Items
Adverc Controller
Alternator (standard) with Serpentine Belt System
Alternator 120 amp Balmar with Serpentine Belt Drive System
Alternator 175 Amp (12v) 2nd, engine mounted
Flexible coupling
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel Recess with clear lid for C panel - click here for recess dimensions
PTO Pulley (twin A sections)
Remote Oil Filter
Literature & Manuals
Installation Drawings
