Beta 43 SD ( V2003 )
Technical specifications
| 43 @ 2800 | |
| 4 | |
| 80mm / 3.15" | |
| 92.4mm / 3.64" | |
| 1999 | |
| 300kg / 660 lbs | |
| Seaprop 60 | |
| 65 amp |
Equipment
Standard Engine Specifications
17.75" (450mm) Mount Centers
65 Amp alternator with Serpentine Belt drive
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
Intake silencer / Air filter
Oil change pump (fitted)
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
Technodrive Seaprop 60 2.15:1 or 2.38:1
Upgrade Items
Alternator 100 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
High Rise Exhaust Elbow for 2" hose - 200mm rise
High Rise Exhaust Elbow for 2" hose - Volvo style cross over
Panel - Type CW Waterproof
Optional Items
Adverc Controller
Alternator (standard) with Serpentine Belt System
Alternator 120 amp Balmar with Serpentine Belt Drive System
Alternator 175 Amp (12v) 2nd, engine mounted
Flybridge Panel
GRP Base for mounting in hull, including stainless ring
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel Extension harness with starter relay
Panel Recess with a clear lid for C panel - click here for recess dimensions
The propeller, 18" diamter - 3 blade fixed with cone nut (alumn)
Propeller, Radici folding propeller 18" x 13"
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan
Water sensor for Saildrive Diaphragm
