Beta 30 SD (D1105)
Technical specifications
| 30 @ 3600 RPM | |
| 3 | |
| 78mm / 3.07" | |
| 78.4mm / 3.09" | |
| 1123cc / 68.53ci | |
| 175 kg / 385 lbs | |
| Seaprop 60 | |
| 65 amp |
Equipment
Standard Engine Specifications
60 Amp alternator with Serpentine Belt Drive
ABV Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
Intake silencer / Air filter
Oil change pump (fitted)
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
Technodrive Seaprop 60 2.15:1 or 2.38:1
Upgrade Items
Alternator 120 amp with Serpentine Belt Drive System
High Rise Exhaust Elbow for 2" hose - 150mm rise
High Rise Exhaust Elbow for 2" hose - 200mm rise
High Rise Exhaust Elbow for 2" hose - Volvo style cross over
Panel - Type ABVW Waterproof
Panel - Type B
Panel - Type C - click here for panel dimensions
Panel - Type CW Waterproof
Optional Items
Adverc Controller
Alternator (standard) with Serpentine Belt System
Alternator 100 Amp 2nd, engine mounted
Alternator 100 amp Balmar with Serpentine Belt Drive System
Alternator 120 amp Balmar with Serpentine Belt Drive System
Engine kit for Volvo 110S Saildrive
Engine kit for Volvo 120S Saildrive
Engine kit for Volvo 130S Saildrive
Engine kit for Yanmar SD20 Saildrive
Flybridge Panel
GRP Base for mounting in hull, including stainless ring
Hot water Fittings
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel - Type A
Panel Extension harness with starter relay
Panel Recess with clear lid for B panel
Panel Recess with a clear lid for C panel - click here for recess dimensions
The propeller, 16" diameter - 3 blade fixed with cone nut (alumn)
Propeller, Radici folding propeller 16"
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan
Water sensor for Saildrive Diaphragm
